Support
 

Sub Structural

Sub Structural
Sub Structural

Steel purlins:

 Purlins, girts and eave struts are secondary structural members used to support the wall and roof panels. Purlins are used on the roof; girts are used on the walls and eave struts are used at the intersection of the sidewall and the roof.

 

Click xem ảnh lớn
  Secondary members have two other functions: they act as struts that help in resisting part of the longitudinal loads that are applied on the building, such as wind and earthquake loads.And they provide lateral bracing to the compression  flanges of the main frame members, thereby increasing frame capacity.

Kinds of purlins: 

  • C section Purlin: C120, C150, C180, C200, C250 ...
  • Z section Purlin: Z120, Z150, Z180, Z200, Z250 ...

Purlins thickness: 1.5 mm - 4mm

 

Standard Material
Surface finish

Specifications
(equivalent to)

Available Thickness (mm)

Purlins/Girts

Eave Struts

Z-Sections

C-Sections

Red Oxide (Primer)

ASTM A607
Grade 50

1.5, 1.75, 2.0,
2.25, 2.5, 3.0

2.0, 2.5, 3.0

2.0, 2.5

  Pre-Galvanized

ASTM A653
Grade SS50, Class I

1.5, 1.75, 2.0,
2.25, 2.5

2.0, 2.5

2.0, 2.5

 

- Roof & Wall Panels

 Panels

 

 

 

 

Phương Tuấn offers a variety of profiles, base metals, metal substrates and coatings for its panels. The metal skins are used as roof and wall panels, interior roof and wall liners, partition panels, soffit panels, etc.

 

 

Single Source

 

Phuong Tuan is your single source for a complete building system. 

Our roof and wall panels are an important part of our products line.
Phuong Tuan Panel Chart (colors & profiles) brochure is available upon request. For requests, please e-mail phuongtuanpy@gmail.com and attach your address with the message.

 

cxcc

         

 

 Wall and Liner Panel (Type "S")

 

 

This is the standard panel for exterior walls, interior liners, interior wall partitions and soffits.

 

The steel panel is available in 0.5 mm nominal thickness only and in all standard colors.

 

The aluminum panel is available in 0.5 mm thickness only and in plain finish or Frost White color only; its use is restricted to interior liners.

 

Single Source

Phương Tuấn - is your single source for a complete building system.

Our roof and wall panel are an important part of our products line.

 

Phuong Tuan Panel Chart (colors & profiles) brochure is available in PDF format. Download Now for the most current availability of standard panel colors and thick nesses.

cxcc

 

Application - Exterior walls soffits, interior liners and partitions

Thickness - Pre-galvanized steel : 0.5 mm (nominal)

Aluminum : 0.5 mm

Colors - XRW available in all standard colors

Panel Related Accessories

 

Eave gutters, downspouts, curved eaves, wall flashings and trims are produced from the same material (base metal, thickness, substrate coating, paint finish and color) as the wall panels of the building.

Ridge panels and roof panel related accessories are produced from the same material as roof panels 

 

 Mezzanine Deck Panel (Type "K")

 

 

This deep-ribbed type "K" panel is the standard Zamil Steel Viet Nam deck panel

for mezzanines and floor systems.

Although exceptionally strong, this panel is used as shuttering for mezzanine reinforced concrete floors and panel is not a substitute for the reinforcement of mezzanine concrete slabs.

 

The type "K" panel is available only (unpainted) in 0.7 mm pre-galvanized coating over steel conforming to ASTM A653M SS Grade 550: Coating Z0.

 

Single Source

Phuong Tuan is your single source for a complete building system

Our roof and wall panel are an important part of our products line.

Phuong Tuan Panel Chart (colors & profiles) brochure is available in PDF format. Download Now for the most current availability of standard panel colors and thick nesses.

xcc

Application - Mezzanine deck

Thickness - Pre-galvanized steel : 0.7 mm

Colors – Unpainted 

Categories of purlin & Girt: 

  • C shaped category: C120, C150, C180, C200, C250...
  • Z shaped category: Z120, Z150, Z180, Z200, Z250...
  • Thickness: 1,5mm - 4mm

 

Back